Nigerdock Nigeria Plc Recruitment for Engineers May, 2014 (Engineering@nigerdock.com)

Nigerdock Nigeria Plc  is West Africa's leading Oil & Gas construction corporation and has an additional focus on major marine services including offshore and pressure vessels fabrication, ship building and repair, industrial training and specialized Oil & Gas and maritime support.
It is strategically located on Snake Island Integrated Free Zone, an impressive industrial free zone facility and port development on an island in the coastal waterway of Lagos, with immediate access to open seas.

Nigerdock has an aggressive investment programme into new plant, equipment and technologies. It is also committed to the training of its workforce and the constant improvement of its systems and procedures

We are recruiting to fill the position below:

JOB TITLE: DOCK MASTER & SHIP MANAGER

Prime Responsibilities:


⦁              Ensure that updated docking plans are maintained for all vessels
(electronic and hard copy) and all new enquiries are verified against
this list / updated as appropriate. Obtain copies of docking plans for
all new vessels if required.

⦁              Prepare blocks as per docking plans and ensure that vessel is in
docking condition prior to docking and undocking and check tank
contents - if not satisfied then direct the owners to place vessel in
the correct condition.

Dock / undock the vessels carefully and correctly so that no damage is
caused to vessels or to the docks either. Maintain control over the tugs
when vessel entering or leaving dock.

⦁              Ensure vessel specs are complete including obtaining copies of all
technical drawings required.

⦁              Interface with clients, superintendents. class surveyors and owners
agents as required for projects.
⦁              Schedule work scope for the yard upon arrival of the vessel and
prepare all variation work orders for approval.

Experience: 5-8 years minimum in similar role.

Send CV to: Engineering@nigerdock.com


JOB TITLE: Crane Technician

Qualification: HND Mechanical Engineering.

Prime Responsibilities:
⦁              Inspect mobile crawler cranes and hoist to ensure safety and
compliance with MFG, OSHA and ANSI standards.
/. Trouble shoot and repair material handling equipment.
⦁              Trouble shoot and repair electrical equipment (strong Knowledge of
electronics required).
⦁              Evaluate and make recommendations regarding repairs.
⦁              Schedules preventive maintenance activities.
⦁              Keeps mobile/crawlers crane system operating by performing
inspections, trOUbleshooting breakdown, performing preventive
maintenance and responding to repair calls.
⦁              Coach and mentor staff to ensure effective transfer of skills and
knowledge.
Experience: 5-10 years minimum, excellent mechanical and electrical
skill required, able to work under pressure and constantly meeting
deadlines.
Software: Proficiency in MS Office
Send CV to: Engineering@nigerdock.com

Location: Abuja
Experience: 5 years

JOB TITLE: EMPLOYEE INTERFACE MANAGER

Qualification: B.SC. Sociology, Psychology, business Admin,
Human resources or any related discipline

Prime Responsibilities:

⦁              Leading expat recruitment process, processing staff requisition forms
for expat positions
⦁              Supporting hiring manager in developing Job Description for
ex(*%#atriates positions.
⦁              Ensuring all recruitment document is completed and well documented

⦁              Ensuring mobilization and demobilization of all expatriates is in line
with group policy.
⦁              General compensations and benefit support. Investigating,
assessing and recommending resolutions to all employee
related issues.
⦁              On boarding and orientation of new expatriates' hire.

⦁              Advising Managers on disciplinary issues including misconduct,
policy practice violation, and proffering corrective measures in line
with group policy

Experience: 7-10 years minimum in oil and gas and construction
Industry. Having strong commitment to high standards of safety and
safeguarding the environment. Significant track record of success
within an operations focused environment.
Must have delivered successful EPC/EPCIC projects.
Send CV to : Professional@nigerdock.com


Experience: 7 years

E& I WORK PACK ENGINEER Qualification: B.Eng. in any Engineering discipline. Master's degree an
added advantage)

Prime Responsibilities:

⦁              To interface with and ensure that the cross discipline Engineer.
construction. commissioning. safety. maintenance and operational
requirements are for within all work packs.

⦁              Interface with construction team to ensure all items required for
construction readiness are clearly identified within the work pack.
⦁              Development of Bill of Materials
⦁              Identify appropriate resources for work pack engineering in
                accordance with agreed project plans.
⦁              To provide technical approvals of all E& I work pack deliverables.
Interface with Design and construction team to optimize build
sequence and commission sequence.
Experience: 5-7 years minimum in Oil & Gas Projects.
Software: Ability to use Microsoft Office Suite. Good understanding of
construction requirement. Previous experience of estimating and
compiling constructions work pack.         
Send CV to: Engineering@nigerdock.com


Experience: 5 years

JOB TITLE: Welding Engineer

Qualification: B.Eng. in Metallurgy or any related discipline.
Prime Responsibilities:
⦁              Work closely with fabrication/welding team to determine optimal
welding parameters with equipment type, process, joint configuration
and consumables selection.
⦁              Create weld procedures that meet customers and code specification
for pipes and structural fabricated assemblies and perform
procedures qualification test in compliance with project specification.
⦁              Review detailed drawing and determine joint configuration and weld
Symbols

Send CV to: Engineering@nigerdock.com

Experience: 5 years


JOB TITLE:OPERATIONS DIRECTOR

Qualification: B.Eng. in any Engineering or Commercial Discipline.
Master degree/professional qualification (an added advantage)
Prime Responsibilities:
⦁              Direct operations to assure delivery metrics.
⦁              Deliver required financial result through effective delivery of projects.
⦁              Support the acquisition of new work by actively sponsoring technical
bids for t9rgeted projects.
⦁              Maintain adequate backlog and throughput of work.
⦁              Create business strategies and plans for each operational area to grow
the business in accordance with the company devebprnental plans.
⦁              Ensure that all bids are fully in compliant with the terms of the Nigeria
Content Act.
⦁              Ensure the highest level of transparency and integrity is maintained
within the business.
⦁              Sponsor and maintain Nigerdock as Nigeria's Industrial Champion.

Experience: 7-10 years minimum in oil and gas and construction
Industry. Having strong commitment to high standards of safety and
safeguarding the environment. Significant track record of success
within an operations focused environment.
Must have delivered successful EPC/EPCIC projects.
Send CV to : Engineering@nigerdock.com

Experience: 7 years


JOB TITLE: ELECTRICAL PLANT SUPERINTENDENT

Qualification: B.Eng. in any Electrical Engineering
Candidate would be accountable for the troubleshooting and
problem resolution of all electrical plant equipment issues

Prime Responsibilities:
⦁              Control generator outputs to match the phase, frequency and
                voltage of electricity supplied to panels.                .
⦁              Monitor power plant equipment and indicators to detect evidence
of operating problems.
⦁              Adjust controls to generate specified electrical power or to regulate
the flow of power between generation stations and substations.
⦁              Control power generating equipment, including generators using
control boards or semi-automatic equipment.
⦁              Regulate equipment operations and conditions, such as water
levels, based on instrument data or from computers.
⦁              Communicate with system operators to regulate and coordinate line
voltages, transmission loads and frequencies.
⦁              Operate or maintain distributed power generation equipment.
including fuel cells to provide energy on site.
⦁              Inspect recordsllogbook entries or communicate with plant personnel
to assess equipment operating status

Experience: 3-5 years working with electrical, electronic and mechanical
maintenance, 3 of which must be in Oil & Gas Projects. Good working
of; diesel power generator(some catapillar power systems would be
an advantage, high voltage(11kv}, step up/down transformer,
substations, switch gear and electronics.
Able to trouble shoot on HV and LV systems.
Software: Proficiency in MS Office

Send CV to: Engineering@nigerdock.com

Experience: 3 years

JOB TITLE: PIPING WORKPACK ENGINEER

Qualification: B.Eng. in any Engineering discipline.

Prime Responsibilities:
⦁              To interface with and ensure that the cross discipline Engineer.
Construction, Commissioning, Safety, Maintenance and Operational
requirements are for within all Workpacks.
⦁              To meet the requirements of the agreed schedule identified within
the project plan for all Workpack deliverables.
⦁              To provide technical assurance to the project that all aspects of the
Scope Of Work (SOW) and Statement Of Requirement (SOR) have
been fully addressed within each Work pack identifying and raising with relevant design disciplines any additions andior changes if required.
⦁              Interface with Construction Team to ensure all items required for
construction readiness are clearly identified within the Workpack'

Experience: 3-5 years in construction fabrication in oil and gas. Good understanding of construction requirements. Previous experience of estimating and compiling construction work packs. ,Competencies.
Software: Experience using Microsoft office.
Send CV to: Engineering@nigerdock.com
Experience: 3 years


JOB TITLE: COMMERCIAL MANAGER

Qualification: Degree in contract Management or any related diScipline.

Prime Responsibilities:
⦁              Developing strategies for negotiations in alignment with company
objectives and leading negotiations for complex contracts.
⦁              Review contract documentations.
⦁              Settling disputes regarding contract interpretations, conditions or
                compliance with legal requirements.      .
Leading contract/project reviews and the balance score card process.
⦁              Identifying risks and developing mitigation strategies to deal with
unforeseen circumstances.
⦁              Provide input support and feedback into the Commercial Level
Agreements and other contractual based initiatives as contracts
are underpinning and Operating Level agreements.

Experience: 15+ years' experience in the Oil & Gas industry.
Overseas and/or Africa work experience
Software: Computer Literate - MS Project. MS Excel, MS Word,
Familiar with EDMS - Team Binder.
Send CV to: Engineering@nigerdock.com

Experience: 15 years


JOB TITLE: PACKAGE UNIT ENGINEER

Qualification: B.Eng. in any Engineering discipline.

Prime Responsibilities:
⦁              To deliver package equipment purchased by the company in
accordance with the terms and conditions in the Purchase Orders.
within budget and on time ..
⦁              Responsible for the complete cycle of equipment specification.
supplier selection, purchase of equipment, supplier drawing review,
equipment acceptance and delivery to site (erection) and turn-over .

Experience: over 10 year experience in engineering design, project
engineering, procurement, inspection and expediting, equipment
installation, testing and commissioning. An excellent communication skill.
A working knowledge of french is an advantage
Software: Proficiency in MS Office suites.

Send CV to: Engineering@nigerdock.com

Experience: 10 years


JOB TITLE: LEAD PROJECT CONTROLS ENGINEER

Qualification: B.Eng. in any Engineering discipline
Prime Responsibilities:

⦁              Develops & maintains project planning procedures and tools for tracking
and analysis of project progress against agreed baseline schedules.

⦁              Develop and assure compliance with the allocated contract's work
breakdown structure and coding by review of project deliverables -
provide guidance and assistance as required. Assist the development,
update and maintenance of corporate detailed planning deliverables for
the Nigerdock work-scope.

⦁              Produce lateral deliverables encompassing planning and cost deliverables
as required

Experience: Minimum 12 years of facilities engineering experience
primarily in a planning role within the oil and gas industry with cost
experience - a minimum of 5 years of which in a senior role. Significant
project controls skills with full awareness of interfacing requirements of
the cost envelope within projects. Able to work laterally and generate
project controls procedures encompassing planning and cost deliverables.
Ability to lead authoritatively and offer guidance within the project controls domain
Software: Proficiency in MS Office and extensive experience in
Primavera and schedule management systems
Send CV to: Engineering@nigerdock.com 


Experience: 12 years


JOB TITLE: LEAD PROJECT CONTROLS ENGINEER Q

ualification: B.Eng. in any Engineering discipline
Prime Responsibilities:

⦁              Develops & maintains project planning procedures and tools for tracking
and analysis of project progress against agreed baseline schedules.

⦁              Develop and assure compliance with the allocated contract's work
breakdown structure and coding by review of project deliverables -
provide guidance and assistance as required. Assist the development,
update and maintenance of corporate detailed planning deliverables for
the Nigerdock work-scope.

⦁              Produce lateral deliverables encompassing planning and cost deliverables
as required

Experience: Minimum 12 years of facilities engineering experience
primarily in a planning role within the oil and gas industry with cost
experience - a minimum of 5 years of which in a senior role. Significant
project controls skills with full awareness of interfacing requirements of
the cost envelope within projects. Able to work laterally and generate
project controls procedures encompassing planning and cost deliverables.
Ability to lead authoritatively and offer guidance within the project controls domain
Software: Proficiency in MS Office and extensive experience in
Primavera and schedule management systems
Send CV to: Engineering@nigerdock.com 


Experience: 12 years


JOB TITLE: SENIOR WELDING INSTRUCTOR

Qualification: HND in Mechanical or Metallurgy Engineering or
. relevant trade test - TIG/Flux Core +SSCE
Prime Responsibilities:
⦁              Identify the educational needs of trainees, and developing formal
educational training programs or classes, and teaching or
instructing others
⦁              Administering oral, written or performance test to measure progress
and to evaluate training effectiveness. Instructing students
individually and in groups, using various teaching methods, such as
lecture, discussions and demonstrations.

⦁              Observing and evaluating students work to determine progress,
provide feedback, and make suggestions' for improvement.
⦁              Preparing Material Take Offs (MTO) for training courses.
.' Ensuring that all subordinate training school employees are
conversant with welders training syllabus.
⦁              Preparing and delivery of candidates' aptitude test. Preparing,
deliver and evaluate and report on all practical welding training
modules and periodic examinations.

Experience: Minimum of 3 years' experience in specialty area.
Ability to instruct! teach, Strong Interpersonal and communication
skills, ability to motivate trainees and apprentices.

Send CV to: professionals@nigerdock.com
Experience: 3 years

JOB TITLE: JUNIOR MACHINIST INSTRUCTOR

Qualification: HND in Mechanical or Metallurgy Engineering or
relevant trade test +SSCE
Prime Responsibilities:
⦁              Ensure that all Materials are of the correct quality. type, grade
and size.
⦁              Ensure that sufficient materials are prepared and available for
training courses

⦁              Assist in ensuring that all hand tools and machine tools are fit for
purpose and in sufficient quantity.

⦁              Ensure that all machining equipment is operational and safe for use.

⦁              Preparing Material Take Offs (MTO) for training courses.
⦁              Assists in the preparation, delivery. evaluation and reporting on
all theoretical machinist training modules

⦁              Preparing and delivery of candidates' aptitude test. Preparing,
deliver and evaluate and report on all practical machinist training
modules and periodic examinations.

Experience: Minimum of 3 years' experience as a machinist.
Ability to instruct! teach. Strong Interpersonal and communication
skills and Ability to motivate trainees and apprentices.

Send CV to: professionals@nigerdock.com

Experience: 3 years

JOB TITLE: CONSTRUCTION ENGINEER
(Lifting & Transportation)

Qualification: B.Eng. in any Engineering discipline.

Prime Responsibilities:
⦁              To work closely witti Project Management 1 earn, Rigging & Equipment
Department and others to provide direction and guidance to construction
sequences and methods ..
⦁              To develop detailed procedures for lifting, movement and transportation
including rigging and slinging details
⦁              Perform weight control engineering to ensure accuracy of weight and
centre of gravity information.
⦁              To perform finite element analysis to ensure stresses and deflections
do not exceed allowable limits
⦁              Work with Rigging & Equipment Department on selection of equipment
to be used.

Experience: Minimum of 10 years Construction Engineering in the oil
and gas construction industry. Familiar with construction methods for
Jackets, Decks and Piles, including methods of lifting, staCking, roll-up,
weighing, load-out etc. Familiar with international codes and standards
governing steel construction (A1SC, DNVetc).

Software: Experienced in using structural analysis software Proficiency
in Primavera 3 & 6, MS Projects

Send CV to: Engineering@nigerdock.com
Experience: 10 years

JOB TITLE: SENIOR PROJECT MANAGER

Qualification: B.Eng. in any Engineering discipline or any related
discipline. Master's degree / PMP Certification (An added advantage)
Prime Responsibilities:
⦁              Responsible for Project P&L Responsible for the development of
detailed
⦁              Project Execution Plans addressing the key project objectives for
Safety. Quality, Schedule and Cost and how they will be achieved.

⦁              Identification of risk and opportunities and how risk should be
mitigated and opportunities materialized.
⦁              Direct, manage, coach and support the project management team(s)
to achieve the key objectives
⦁              Prepare technical proposals.
Experience: 5-8 years minimum in similar role. Proven leadership and
people management skills in the offshore Oil & Gas and Petrochemical
industry. Construction & Completion driven.
FPSO Experience with a Strong commercial mind-set.
Software: Proficiency in MS Office suites
Send CV to: Engineering@nigerdock.com
Experience: 5 years

Deadline: 20th May, 2014

Related Posts

0 comments: